Stained Glass Windows - Revision history

Mxmsj at 11:01, 19 March 2021

2021-03-19T11:01:22Z

← Older revision		Revision as of 13:01, 19 March 2021
Line 27:		Line 27:
	:23) Finish with cream.		:23) Finish with cream.
	:24) Place wire through rings.		:24) Place wire through rings.



	[[Category:Środowisko]]		[[Category:Środowisko]]
	[[Category:Ecclesial Art Projects]]		[[Category:Ecclesial Art Projects]]

Sara at 20:17, 18 August 2014

2014-08-18T20:17:32Z

← Older revision		Revision as of 22:17, 18 August 2014
Line 1:		Line 1:
	==~~Step-by-Step~~==		==Materials==

	~~Step~~ 1. Choose a pattern.
	~~Step~~ 2. Number each piece on both copies of the pattern.		==Procedures==
	~~Step~~ 3. Color the cardstock pattern and the paper pattern. Color in the same direction that the glass ought to flow.		:1) Choose a pattern.
	~~Step~~ 4. Cut out the cardstock pieces with pattern shears.		:2) Number each piece on both copies of the pattern.
	~~Step~~ 5. Reassemble the picture.		:3) Color the cardstock pattern and the paper pattern. Color in the same direction that the glass ought to flow.
	~~Step~~ 6. With rubber cement, glue each pattern piece to the corresponding glass, aligning it with the streaks in the glass.		:4) Cut out the cardstock pieces with pattern shears.
	~~Step~~ 7. Cut out each piece of glass and reassemble the image.		:5) Reassemble the picture.
	~~Step~~ 8. Grind the edges of each glass piece.		:6) With rubber cement, glue each pattern piece to the corresponding glass, aligning it with the streaks in the glass.
	~~Step~~ 9. Soak the glass clean.		:7) Cut out each piece of glass and reassemble the image.
	~~Step~~ 10. With a marker, write numbers on the glass pieces.		:8) Grind the edges of each glass piece.
	~~Step~~ 11. Foil the edges with copper foil tape.		:9) Soak the glass clean.
	~~Step~~ 12. Use a fid to flatten the foil and make it even.		:10) With a marker, write numbers on the glass pieces.
	~~Step~~ 13. Arrange the glass pieces on a board, using horseshoe nails to secure them in place.		:11) Foil the edges with copper foil tape.
	~~Step~~ 14. Brush liquid flux on the copper. Keep it away from open wounds!		:12) Use a fid to flatten the foil and make it even.
	~~Step~~ 15. Solder little dots on the joints to keep the pieces in place.		:13) Arrange the glass pieces on a board, using horseshoe nails to secure them in place.
	~~Step~~ 16. Remove the nails.		:14) Brush liquid flux on the copper. Keep it away from open wounds!
	~~Step~~ 17. Solder the seams of the glass. Flip and repeat.		:15) Solder little dots on the joints to keep the pieces in place.
	~~Step~~ 18. Solder the jump rings.		:16) Remove the nails.
	~~Step~~ 19. Clean the glass.		:17) Solder the seams of the glass. Flip and repeat.
	~~Step~~ 20. Choose the color of your solder: silver, copper, black.		:18) Solder the jump rings.
	~~Step~~ 21. Patina for copper and black.		:19) Clean the glass.
	~~Step~~ 22. Edge with lead came or solder.		:20) Choose the color of your solder: silver, copper, black.
	~~Step~~ 23. Finish with cream.		:21) Patina for copper and black.
	~~Step~~ 24. Place wire through rings.		:22) Edge with lead came or solder.
			:23) Finish with cream.
			:24) Place wire through rings.

Sara at 20:08, 18 August 2014

2014-08-18T20:08:16Z

← Older revision		Revision as of 22:08, 18 August 2014
Line 1:		Line 1:
			==Step-by-Step==

			Step 1. Choose a pattern.
			Step 2. Number each piece on both copies of the pattern.
			Step 3. Color the cardstock pattern and the paper pattern. Color in the same direction that the glass ought to flow.
			Step 4. Cut out the cardstock pieces with pattern shears.
			Step 5. Reassemble the picture.
			Step 6. With rubber cement, glue each pattern piece to the corresponding glass, aligning it with the streaks in the glass.
			Step 7. Cut out each piece of glass and reassemble the image.
			Step 8. Grind the edges of each glass piece.
			Step 9. Soak the glass clean.
			Step 10. With a marker, write numbers on the glass pieces.
			Step 11. Foil the edges with copper foil tape.
			Step 12. Use a fid to flatten the foil and make it even.
			Step 13. Arrange the glass pieces on a board, using horseshoe nails to secure them in place.
			Step 14. Brush liquid flux on the copper. Keep it away from open wounds!
			Step 15. Solder little dots on the joints to keep the pieces in place.
			Step 16. Remove the nails.
			Step 17. Solder the seams of the glass. Flip and repeat.
			Step 18. Solder the jump rings.
			Step 19. Clean the glass.
			Step 20. Choose the color of your solder: silver, copper, black.
			Step 21. Patina for copper and black.
			Step 22. Edge with lead came or solder.
			Step 23. Finish with cream.
			Step 24. Place wire through rings.



	[[Category:Środowisko]]		[[Category:Środowisko]]
	[[Category:Ecclesial Art Projects]]		[[Category:Ecclesial Art Projects]]

Mxmsj at 01:54, 17 August 2014

2014-08-17T01:54:55Z

← Older revision		Revision as of 03:54, 17 August 2014
Line 1:		Line 1:
	[[Category:Środowisko]]		[[Category:Środowisko]]
			[[Category:Ecclesial Art Projects]]

Sara: Created page with "Category:Åšrodowisko"

2014-08-17T01:20:10Z

Created page with "Category:Åšrodowisko"

New page

[[Category:Środowisko]]